A7 Technical Information

Unit Specifications: (Ambient Temp. 68’F)

Energy Factor:
2.2 gama logo
Dimensions:
 18" x 14" x 13"(height)
Output:
 7,720 BTUs
Ist Hour Rating:
 44 Gallons gama logo
Max. Water Temperature:
130° F (10° F between open and close)
Weight:
 50 lbs
Noise Level:
about 50 db

Electrical Specifications:
Volts:
115
Amps:
 12 startup/6 operating
Phase:
 1
Frequency:
 60 Hz

Note: All measurements have been acquired using DOE testing standards.

Additional Requirements:
• AirTap™ needs at least 5" clearance on the top.
• AirTap™ should be installed indoors.
• Water heater must be installed near a drain available to expel condensate captured during air energy processing. During periods of high humidity, the level of condensate can be up to 1 quart per day.
• The AirTap™ will operate under extremely cold conditions, but it is not recommended to install the unit in a location where the ambient temperature is below 35° F mostly, as the efficiency of the unit in such conditions will drop by approximately 50%.